Lead Sequence; Lead Groups - GE MAC 600 Operator's Manual

System Setup
Function
Auto gain
Auto shift

Lead Sequence

With Lead Sequence highlighted, press the Enter key. The Lead Sequence window opens.
Select Standard lead sequence or Cabrera lead sequence. Depending on the lead sequence
selected, the leads defined under the Lead Groups will change to the respective lead sequence.
The default lead sequence is Standard.

Lead Groups

With Lead Groups highlighted, press the Enter key. The Lead Groups window opens.
96
Description
Select Yes to enable Auto gain.
The Auto gain feature adjust the gain to minimize waveform
overlap. Depending on the amount of overlap, the Auto gain may
be applied to all leads or only the chest leads. The default is No.
Select Yes to enable Auto shift.
The Auto shift feature automatically shifts the waveforms
vertically to avoid (or minimize) waveform overlap between rows.
The default is Yes.
MAC™ 600 2047426-001K