E K I P T O U C H T R I P U N I T S
40
This completes the settings of the Ground Fault / G Protection Function.
A P P LY I N G/CO N F I R M I N G T H E A DJ U S T M E N T S T O P R O T E C T I O N S S E T T I N G S
At the conclusion of inputting all the settings, these new settings MUST be confirmed to saved.
NOTE: This process applies to changing one or more settings/parameters within the trip unit and can be completed at any point in the above
process.
Step 35. Press ESC button (35a) until the following Programming Screen appears then Press Enter button
(35b)to Confirm.
The LSIG Protection Parameters are now Updated.
35a
35b