ABB Ekip Touch Operating Instructions Manual page 61

P R OT E C T I O N S E T T I N G S S E T U P F O R E K I P TO U C H T R I P U N I T S
Step 4. Press Down button (4a) to find Date menu and Press Enter button (4b).
Step 5. This display is presented (In order to change settings, a password is required)
Default Password: 00001. Zero appears in the first PIN box.
Press Enter button (5b) to accept zero
Repeat for the next three PIN boxes
On the 5th PIN box change from zero to one (press the Up button (5a)), then press Enter button (5b)
This will allow Settings to be changed.
Note: Once the PIN code has been entered, all displays can be browsed for two minutes: once two minutes has elapsed, the PIN code must be entered
again (depending on the case in question).
Step 6. Press Up or Down buttons (6a) to adjust to the current Date and Press Enter (6b).
Holding the Up or Down buttons (6a) will advance the settings faster.
4a 4b
6a 6b
61
5a
5b