Fixed Station Operation - Kenwood TM-261A Instruction Manual

m Fixed Station Operation
Fuse holders
In order to use this transceiver for fixed station
operation, you will need a separate 13.8 V DC power Red (+)
supply that must be purchased separately. Black (-) <=
Regulated DC
power supply
@
url
The following table lists the current capacity
recommended for power supplies used with each type
of transceiver.
TM-4614 | 10 A or more
1 Connect the DC power cable to the regulated DC
power supply and check that polarities are correct
the following optional power supply is recommended:
PS-33 (20.5 A, 25% duty cycle).
Before connecting the DC power supply to the transceiver, be
sure to switch the transceiver and the DC power supply OFF.
@ Do not piug the OC power supply into an AC outlet until you
make all connections.