Kenwood TM-261A Instruction Manual page 17

DISPLAY
i |
= BUSY Seer ee by ll gr td
® wo
Indicates the Transceiver Lock function is ON {page 46}.
@-+4
Indicates the transmit frequency is offset (different) from the
receive frequency {page 22}. The symbol displayed (either
"+" or"~") indicates the direction that the transmit
frequency is offset from the receive frequency. "— +"
appears when a split-frequency memory channel is
selected {page 25}.
@R
Indicates the Reverse function is ON {page 23}. Transmit
and receive frequencies are reversed. If any frequency is
selected for "TONE.RX" in Menu B, RX Tone frequency and
TX Tone frequency also are reversed. Refer to "Selecting a
Tone Frequency" {page 23}.
@ cT
"T" indicates the subaudible Tone encoder function is ON
{page 22}. "CT" indicates the CTCSS function is ON
{page 36} provided the optional TSU-8 CTCSS unit is
installed {page 54}.
® DT
Indicates the Dual Tone Squelch System (DTSS) is ON
{page 37}.
® co
Indicates Carrier-Operated Scan Resume is ON {page 31}.
When not visible, Time-Operated Scan Resume is in effect.
@) MENU
Visible while accessing Menu A or Menu B {page 17}.
Displays the transmit/receive frequency, frequency step
{page 45}, Offset frequency {page 21} and other data. Also
displays the menu selections when using Menu Set-Up.
The 1 MHz decimal point blinks while the transceiver is
scanning {pages 32, 35}.
OF T=)
Displays the currently selected memory channel number
{page 26}. The first digit displays "A" or "B" depending on
which Menu ts being accessed.
11