Tuning Comtrol; Microphone [Upj[Dwn] Buitons; Eer Ee Ress - Kenwood TM-261A Instruction Manual

SELECTING FREQUENCIES * Frequencies can also be selected via the microphone
keypad (MC-53DM only). See "KEYPAD DIRECT
within easy reach of the transceiver Front Panel, and F p :
the frequencies to be selected lie near the current Peing mveren) lone [UR YLO WN] ot ineabeney seection
i ili i ou are not ; frequency. is useful when mobiling or any time you
immediately in front of the transceiver.
1 Press [VFO] to select VFO mode.
Press [UP] or [DWN] once to change the receive
frequency by one frequency step in the direction
indicated by the button.
¢ Pressing and holding either button causes the frequency
to step repeatedly in one direction until the button is
released.
2 Turn the Tuning control to select a receive
frequency.
¢ Clockwise rotation increases the frequency one MC-53DM
frequency step at a time.
* Counterclockwise rotation decreases the frequency
one step at a time.
* If you cannot select a particular receive frequency, the
frequency step size needs to be changed. See
"CHANGING FREQUENCY STEP SIZE" {page 45} for
further information.
EEA SE ENO SERN SNE RE AOR eS oo Bol