Storing Data In Memory - Kenwood TM-261A Instruction Manual

\ MEMORY CHANNELS
A total of 62 memory channels (1 ~ 62) are available for The data listed below can be stored in each memory
storing frequencies and related data. Each memory channel:
channel can be used either as a simplex channel or split
channel for storing any frequency or frequency pair that
can be selected on the transceiver. Alternatively, a
standard offset and offset direction required for using TAX frequency
repeaters can be stored. Refer to "OPERATING
THROUGH REPEATERS" {page 20}. TX frequency
RX Tone (CTCSS) frequency
STORING DATA IN MEMORY TX Tone (CTCSS) frequency
There are 2 methods of storing transmit/receive PONS ORG oesaUe
frequencies and associated data in memory channels Frequency step
depending on the relationship of the transmit and receive
frequencies:
* Simpiex memory channels: Reverse status
AX frequency = TX frequency DTSS code, DTSS status
* Split memory channels:
RX frequency # TX frequency
Offset direction, Offset status
Memory channel name
YES: Can be stored in memory.
N/A: Not applicable
7: eee neem ennemeenneennenememennmenennmennneeneneenennnnenemenennnnenenenenenmnemnenmenmmennenniensesieeiandeiiansidseinnabieidbieieeiaeiamemnnmenmnemnnemneneemnmnel