Transmitting Ue; Selecting Output Powgs A Cdiccceccpctvcetsuecsdesaasecvacdeves; Cece Cccteseeeesseeeesnenreeessseeeneeee - Kenwood TM-261A Instruction Manual

TRANSMITTING @ Selecting Output Power
When ready to begin transmitting, press and hold [PTT] It's wise, and required by law, to select the lowest power
and speak in a normal tone of voice. Speaking too close to that allows reliable communication. If operating from
the microphone, or too loudly, may increase distortion and battery power, lower transmit power will give you more
reduce intelligibility of your signal at the receiving station. operating time before a charge is necessary. Reducing
power lowers the risk of interfering with others on the
band too.
Press [F], [MN] to select the transmit power you
require.
MC-53DM e Each time this key operation is repeated, the transmit
power is changed as shown below.
¢ The transmit power cannot be changed while transmitting.