Changing Call Channel Contents (Split); Memory = Vfo Transfers - Kenwood TM-261A Instruction Manual

2 Press [F], microphone [CALL] (1 s).
e "—+' appears.
on a a |
MHz "oe TONE REV
« The channel number is visible if using Memory Recall
mode in Step 1.
4 Press microphone [CALL].
MEMORY = VFO TRANSFERS
Transferring the contents of a memory channel or the Call
channe! to the VFO can be useful if you want to search for
other stations or a clear frequency near the selected
memory channel or Call channel frequency.
1 Press [MR] to select Memory Recall. !f you want to
select the Call channel, press microphone [CALL].
2 Recall the desired memory channel by turning the
Tuning control or pressing microphone [UP]/[DWN].
¢ This step is not necessary if thé Call channel was selected
in Step 1.
Press [F], [VFO].
¢ The complete contents of the memory channel or the Call
channel are copied to the VFO. VFO mode is selected
after the transfer is completed.