Supplied Accessories - Kenwood TM-261A Instruction Manual

SUPPLIED ACCESSORIES
Microphone
U.S.A./Canada/
General (some): MC-53DM |
China/
General (some): MC-45!
T91-0568-XX
T91-0516-XX
DC power cable
E30-2111-XX
Transceiver fuse
TM-261A: 15A
TM-261EJ: 4A
TM-461A: 10 A
F51-0017-XX
F51-0013-XX
F51-0016-XX
Mounting bracket
J29-0628-XX
Mounting bracket screws
N99-0331-XX
Wrench
W01-0433-XX
Warranty card wo
(U.S.A./Canada only)
— a
Instruction manual
B62-0605-KX
1 The MC-53DM and MC-45 microphones are sold as
optional accessories also {page 53}.
CONVENTIONS FOLLOWED IN THIS MANUAL
The writirig conventions described below have been
followed to simplify instructions and avoid unnecessary
repetition.
ATTENTION: Most procedures require that you press an appropriate
key in each step within approximately 10 seconds, or the previous mode
will be restored.
_. . , Instruction
Press [KEY]. Press and release KEY.
Press
[KEY 1]+[KE Y2].
Press and hold KEY1 down,
then press KEY2.
Press
[KEY1], [KEY2].
Press KEY1 momentarily,
release KEY1, then press
KEY2.
Press
[KEY]+ POWER ON.
With transceiver power OFF,
press and hold KEY, then turn
ON the transceiver power by
pressing [POWER].
Press and hold the Function
key for 1 second or longer.
Press
[KEY] (1 s).
—+
Press and hold KEY until the
function begins.
Press
[F], [KEY] (1 s).
Press [F] momentarily, release
[F], then press and hold KEY
for 1 second or longer.