Panasonic DVCPRO AJ-D455P Service Manual page 172

6. When the settings on the "Setup Panel" is completed, click "Ok(O)". The "Main Panel" will be opened as
shown below.
7. Click "Start (S) " on the "Main Panel". (If you want to quit here, click "Exit". If you want to return again to the
"Setup Panel", click "Setup(Z)".)
8. After erasing of the flash memory, the new software will be written to the flash memory. During the processing,
the progress status can be confirmed by means of the "Process" indicator. If the indicator should not advance
for some reason, click "Emergency stop(C)" to stop the work, connect again, and confirm the settings.
9. When erasing and writing of the flash memory is completed, the "Process" indicator reaches 100%, and a
black dot appears for "Waiting to start or Complete" of "Operating information". (Next page)
10. When the above status is reached, click "Exit(X) " to end the program.
11. When the version upgrade is completed, turn off the power of the AJ-D455P and remove the version up
tool.
12. Turn on the AJ-D455 power again and press the buttons "PLAY" and "STOP" at the front panel
simultaneously to confirm that the version has been upgraded.
INF-47