Composite Pb Signal Level Adjustment; Composite Pr Signal Level Adjustment - Panasonic DVCPRO AJ-D455P Service Manual

5-19.Composite Pb signal Level
Adjustment
BOARD
V IN (F5)
TP Composite PB OUT
ADJ. Service Menu
TAPE -----
INPUT Analog Composite Signal
(100% Color Bar with 7.5% Set-up)
MODE EE
M. EQ
Analog WFM
SPEC. Pb signal level (A): 700± 4mV
1. Open the SERVICE MENU. (Refer to SEC1
Service Information.)
2. Select the E00: V IN ADJUST and press the
"SET" button to open the V IN ADJUST MENU.
Select E-2 CMPST ADJUST and press the "SET"
3.
button to open the CMPST ADJUST menu.
Adjust the E02 SITE PB GAIN so that the level
4.
"A" is in the specification.
5. Close the menu.
Pb OUT
5-20.Composite Pr Signal Level
BOARD
INPUT
MODE
M. EQ
SPEC.
1.
2.
3.
4.
5.
Pr OUT
A
ELE-28
Adjustment
V IN (F5)
TP Composite PR OUT
ADJ. Service Menu
TAPE -----
Analog Composite Signal
(100% Color Bar with 7.5% Set-up)
EE
Analog WFM
Pr signal level (B): 700± 4mV
Open the SERVICE MENU. (Refer to SEC1
Service Information.)
Select the E00: V IN ADJUST and press the
"SET" button to open the V IN ADJUST MENU.
Select E-2 CMPST ADJUST and press the "SET"
button to open the CMPST ADJUST menu.
Adjust the E05 SITE PB GAIN so that the level
"B" is in the specification.
Close the menu.
B