Panasonic DVCPRO AJ-D455P Service Manual page 90

5-28.Pb signal Level (YC IN)
Adjustment
BOARD
V IN (F5)
TP Component Pb OUT
ADJ. Service Menu
TAPE -----
INPUT Analog YC Signal
(100% Color Bar with 7.5% Set-up)
MODE EE
M. EQ
Analog WFM
SPEC. Pb signal level (A): 700 ± 4mV
1. Open the SERVICE MENU. (Refer to SEC1
Service Information.)
2. Select the E00: V IN ADJUST and press the
"SET" button to open the V IN ADJUST MENU.
Select E-3 YC ADJUST and press the "SET"
3.
button to open the CMPST ADJUST menu.
Adjust the E02 YC PB GAIN so that the level "A"
4.
is in the specification.
5. Close the menu.
Pb OUT
5-29.Pr signal Level (YC IN)
BOARD
INPUT
MODE
M. EQ
SPEC.
1.
2.
3.
4.
5.
Pr OUT
A
ELE-33
Adjustment
V IN (F5)
TP Component PR OUT
ADJ. Service Menu
TAPE -----
Analog YC Signal
(100% Color Bar with 7.5% Set-up)
EE
Analog WFM
Pr signal level (B): 700 ± 4mV
Open the SERVICE MENU. (Refer to SEC1
Service Information.)
Select the E00: V IN ADJUST and press the
"SET" button to open the V IN ADJUST MENU.
Select E-3 YC ADJUST and press the "SET"
button to open the CMPST ADJUST menu.
Adjust the E05 YC PR GAIN so that the level "B"
is in the specification.
Close the menu.
B