Disassembly Procedures; Removal Of Top Panel; Removal Of Bottom Panel; Removal Of Front Panel Unit - Panasonic DVCPRO AJ-D455P Service Manual

DISASSEMBLE PROCEDURES

1-1. Removal of Top Panel

1. Loosen s screws (A) and remove the Top Panel.

1-2. Removal of Bottom Panel

1. Unscrew the 6 screws (A) and remove the Bottom
Panel.
Screws (A)
Screws (A)
DIS-1
1-3. Removal of Front Panel
1. Unscrew the 4 screws (A) and remove the Front
Panel.
(b)
P1
(a)
Screws (A)
Notes:1. When remove the Front Panel, slightly pull
the Front panel for direction in arrow (a)
(disconnect a connector P1) and then
remove the Front Panel for direction in
arrow (b).
2. After installation of Front Panel, confirm
that the Blinder Panel is moved up and
down smoothly by hand.
3. Check the connector has been connected
securely.

1-4. Removal of Front Loading Unit

1. Remove the Front Panel. (Refer to item 1-3.)
2. Loosen 2 screws (A) and remove the Carriage
support angle.
Screws (A)
(b)
Carriage support angle