Table of Contents
Advertisement
13-2. DEFAULT Operation
13-2-1. RF adjustment (B00)
In the RF adjustment, it is possible to save the set values to an area different from the back up area for the present
set valng. The saved setting can be loaded as the present setting. This operation is effective only after the loading is
completed.
* Operating procedures
1. Move the cursor "*" onto the "C-4 : DEFAULT".
2. Press the "SET" button on the front panel.
3. Press the "
SAVE : The present setting can be saved as the backup value.
LOAD : The saved backup value can be loaded as the current setting.
(If the SAVE operation has not been carried out, the initial value will be loaded.)
4. Press the "SET" button on the front panel. Then, the selected operation is carried out, and then, the
item setting screen is displayed again. When the "MENU" button is pressed, the item setting screen is
displayed again without any operation carried out.
" and "
" buttons to move the cursor "*" onto the objective item.
INF-28
Advertisement
Chapters
Table of Contents
