12.8.3 List of functions that can be protected
Item name
Data initialization
Memory SW for operators
Memory SW for mechanics
Change Program No.
Program Setting
Production Counter
End detection
Treadle adjustment
Clearance adjustment
Touch panel calibration
Program copy
Cartridge exchange
Data read
Data write
*
If the protect settings have been enabled for both reading of data and writing of data, Data reading and writing items in the
setting menu and special menu are not allowed.
Operation when protect setting is enabled
Data initialization in the adjustment menu is not allowed.
Setting of memory switches for operators in the setting menu is not
allowed.
Setting of memory switches for technicians in the setting menu is not
allowed.
Selecting the program selection screen in the home screen and
changing program numbers are not allowed.
Selecting the following screens from the home screen is not allowed.
▪
"Glue thickness setting"
▪
"Nozzle clearance setting"
"Step selection/editing"
▪
▪
"Roller feed speed setting"
▪
"Glue-free width setting"
▪
"Anti-stop mark setting"
▪
"Comment setting"
Production counter settings in the setting menu and home screen are
not allowed.
Turning the end detection sensor on and off in the home screen is not
allowed.
Treadle position adjustment in the adjustment menu is not allowed.
Nozzle clearance adjustment in the adjustment menu is not allowed.
Touch panel key position adjustment in the adjustment menu is not
allowed.
Program copy operations in the setting menu are not allowed.
Cartridge replacement in the setting menu is not allowed.
The following data reading and writing items in the setting menu and
special menu are not allowed.
▪
Read all data
▪
Read program
Read memory SW
▪
The following data reading and writing items in the setting menu and
special menu are not allowed.
▪
Write all data
▪
Write program
▪
Write memory SW
▪
Write Error Log
BM-2000
12 STANDARD ADJUSTMENTS
105