Table of Contents
Advertisement
6 GLUING
Lower cloth
Memory switch No.
256
Once the mis-alignment between the the upper cloth and the lower cloth has been eliminated, return the feed speed
adjustment switch to the neutral position.
If you try to start gluing while the feed speed adjustment switch is at either the up or down position, an error will occur.
Return it to the neutral position before starting gluing.
50
< If upper cloth moves more slowly >
Upper cloth (slow)
Move the feed speed adjustment switch (1) to the up position.
The upper roller feed speed will become faster by the ratio which has
been set in memory switch No. 256.
The upper roller feed speed will become faster even if gluing operation
is still in progress.
Upper roller speed acceleration rate
when feed speed adjustment switch
is moved up
Refer to "3.5" for details on the memory switch setting method.
Setting
0.0 - 10.0[%]
BM-2000
Setting range
Advertisement
Table of Contents
