Toro Reelmaster 7000-D Operator's Manual page 103

Servicing the Air Cleaner (continued)
Installing the Filter
1. Check the safety-filter element
replace it.
Never attempt to clean the safety filter. Replace the safety filter with a new one after
every 3 primary filter services.
2. Inspect the new filter for shipping damage, checking the sealing end of the filter element
and the body of the air filter.
Do not use a damaged filter element.
3. Assemble the primary-filter element
seat it in the air-filter housing.
Do not apply pressure to the flexible center of the filter.
4. Remove the dust-ejector valve from the air-cleaner cover, clean the cavity, and install
the ejector valve to the cover.
5. Assemble the cover onto the air-cleaner housing, aligning the dust-ejector valve in a
downward position—between approximately 5 o'clock to 7 o'clock when viewed from the
end.
3466-702A
. If it is dirty,
G424757
IMPORTANT
IMPORTANT
. Apply pressure to the outer rim of the element to
IMPORTANT
Page 6–19 Maintenance: Engine Maintenance