Toro Reelmaster 7000-D Operator's Manual page 35

1. Unhook the hood latch
bracket.
2. Remove the 2 rivets
bracket
3. While aligning the mounting holes, position the
CE lock bracket
onto the hood.
Note:
hood.
Do not remove the bolt and nut assembly
from the lock-bracket arm.
4. Align the washers with the holes on the inside
of the hood.
5. Rivet the brackets and the washers to the hood.
6. Hook the latch
3466-702A
from the hood-lock
and the hood-lock
from the hood.
and the hood-lock bracket
The lock bracket must be against the
onto the hood-lock bracket.
G420587
G420588
G420589
G420590
Page 3–13 Setup: Installing the CE Hood Lock