Toro Reelmaster 7000-D Operator's Manual page 127

Adjusting the Service Brakes (continued)
Left brake cable
Right brake cable
Jam nuts
4. To reduce free travel of the brake pedals, tighten the rear jam nut to move the cable
rearward until the brake pedals have 0 to 13 mm (0 to 1/2 inch) of free travel.
Note:
5. Tighten the front jam nut after the brakes are adjusted correctly.
6. If needed, repeat steps
3466-702A
Ensure that there is no brake-cable tension when the pedal is released.
3 through
G425405
G425406
Front of the machine
5 at the other brake cable.
Page 6–43 Maintenance: Brake Maintenance