Toro Reelmaster 7000-D Operator's Manual page 78

Diesel Particulate Filter Regeneration (continued)
2. Park the machine on a level surface, in an area outside away from combustible
materials.
3. Ensure that the traction control or motion-control levers are in the N
4. If applicable, shut off the PTO, and lower the cutting units or accessories.
5. Engage the parking brake and set the throttle to the L
6. In the DPF Regeneration Menu, scroll to
Parked Regen Start or Recovery Regen
Start. Press the right button to start the
regeneration.
7. When prompted, verify that the fuel level is
sufficient, as indicated in step 1. Press the right
button to continue.
8. At the DPF checklist screen, verify that the
parking brake is engaged and the engine
speed is set to low idle. Press the right button
to continue.
9. At the Initiate DPF Regen screen, press the
right button to continue.
The InfoCenter shows the Initiating DPF
Regen message.
The InfoCenter shows the time to complete
message.
• Parked regeneration requires up to 30
minutes to complete
• Recovery regeneration requires up to 3
hours to complete
Operation: During Operation
OW
G448024
G448025
G448026
G448027
G448028
G448040
G448029
Page 5–32
position.
EUTRAL
I position.
DLE
3466-702 A