(6) Connect wires to terminals and/or connectors on Central Station EX.
Refer to "6. Electrical Wiring" (page 13) for detail.
(a) For on Wall Mount
Put wires through designated outlets to connect
them to terminals and connectors.
(7) Take the slack to hook Central Station EX on the hooks on the upper part of the back cover.
(a) For Wall Mount
(8) Tighten the screw (1 screw) on the upper part of the back cover.
Turn the power ON before fitting the front cover.
12
TB2
TB3
TB4
TB5
TB1
(b) For Wall Built-in
Connect wires directly to terminals and
connectors (without putting wires through
outlets).
TB2
TB3
TB4
(b) For Wall Built-in
TB5
TB1
A12124820A