Table of Contents
Advertisement
13.4 Saving and Checking Setting Contents
NOTICE:
●
If output trigger is set as Alarm, signal is transmitted upon detection of alarm on the unit or alarm on the
outdoor unit that is connecting to the cycle.
●
1 signal cannot have 2 or more diff erent contents confi gured.
78
1.
[ ] fl ashes when contents are
changed.
1
Tap [ ] while [ ] is fl ashing to save
the contents.
2
Otherwise the change made is not
registered.
2.
Tap [
] for the registered external in/
output.
3.
Tap [Target units]. This is not
indicated if either of [Emergency
stop (all) setting] or [Meter setting] is
confi gured.
3
■ Tap [Edit] to change the contents.
■ Tap [Delete] to delete contents.
Target units confi gured for specifi ed
external input/output are shown.
5
4.
Touch window and button to scroll
(both horizontally and vertically) the
table appears.
Tap the button to check if the units
are correctly confi gured (shown in
4
green)
5.
Tap [
] to return to external in/output
setting window.
A12124820A
Advertisement
Table of Contents
