Continue from previous page.
NOTE:
The background color of the panels indicates the network connection status of extension adapter.
Network connection
Panel color
(*): Check the network environment and/or setting contents to register again if the panel is shown with background color red.
●
Contents on panel
Operation status of air conditioners is shown in the panel (the largest) as in the following.
3 panel sizes are provided to best select the appropriate size for status and air conditioners desired to be
shown.
Name of Selected
Group or Block
H-LINK No.
System No. - Address No.
Main Unit No.
A12124820A
Registered
Changing setting
(Connected)
(Unregistered)
Green
Light blue
7. Tap [˄] or [˅] to restrict operation for
air conditioners and facility units.
8
Set restriction on operation for On all/
Off all and/or All operation.
●
Restriction on operation is shown only
when the target is the "unit".
●
On all/Off all are for restricting
7
eff ective range for [On all]/[Off all].
8. Tap [
] to confi rm setting and to
return to registering monitoring target
window.
Tap [
] to discard the change and
to return to register monitoring target
window.
9.
Tap [
] to register the contents.
●
Make sure to tap this icon when the
9
contents have been changed.
Otherwise the change made is not
registered.
Upon completion of registration, the
panel color changes from light blue to
green.
●
Registering facility units may take
approximately 10 minutes.
Not registered /
Invalid setting/Error
Red
Unit Icon
Disabled
Gray
31