NEC N926U Owner's Operating Manual page 17

Situation 4
Regular cable TV using normal (non-cable ready) TV receiver (de-scrambled signals):
For cable system with filter type scrambling or no scrambling of premium channels.
NOTE:
If your cable system employs a converter box that provides descrambling for premium channels, these
channels cannot be recorded with this particular hook-up. See hook-ups on page 16 and 17.
I
Converter box :
Cable TV line
~
1
Remote control
Normal TV receiver
(Swtich box)
ANTIN
RF OUT
NEel I
V~
E_T,.;4.+£AO
01
I
.~
-
~
. .
-.~_
.
...,.
~
...
""'v~'"
=-""'
H[J ........
ON SCREEN PROGRAMMIN
CCC CCCCD D
I
= =
.:flJ
ILOW""'''''N1
"'AY~
-
T
When connecting to a normal TV receiver (without cable channels), it is necessary to connect a converter
box with a remote control (supplied by the cable TV company) between the N926U and the TV receiver
Leave the TV's channel selector to channel 3 (or 4) at all times.
• Connect the converter box to the RF OUT terminal on the VCR and VHF antenna on the TV reciev-
er.
• When the VC R/TV select button on the N926U is set to TV, use the converter box to select any
channel you desire to watch. This setting bypasses the VCR completely.
• When the VCR/TV select button on the N926U is set to VCR, select channel 3 (or 4) on the con-
verter box. You can watch or record any channel by selecting it with the CHANNEL/SET(v)/(A)
buttons of the N926U instead of the channel selector of the converter box.
• When you want to record one channel while watching another, set the VCR/TV select button to TV.
and select the channel to be recorded with the CHANNEL/SET(v)/(A) buttons of the N926U and
the channel to be viewed with the channel selector on the converter box.
-17-