NEC N926U Owner's Operating Manual page 7

REAR VIEW
-
(j]l
Front Compartment
Refer to next page.
@
SHARPNESS control
Slide this control the to left to soften the picture. and slide
it to the right to sharpen the picture.
@
PLAY TRACKING control
Use this control during playback to fine tune the picture
so as to eliminate or reduce noise bars.
(j])
SLOW TRACKING control
This control may be necessary to be used during slow play-
back to fine tune the picture so as to eliminate or reduce
noise bars.
®
AUDIO OUT terminal
Permits audio connection of your unit to a monitor or an-
other VCR. or external sound equipment.
AUDIO IN terminal
For connection to tuner unit, portable video camera, ex-
ternal sound equipment or another VCR.
@ VIDEO IN terminal
For connection to another VCR, a portable video camera or
other video output.
@
VIDEO OUT terminal
Permits video connection of your unit to a monitor or an-
other VCR.
-
4 RF OUT terminal
Connect to the antenna terminal of a TV with antenna
cable (provided).
@
RF OUT CHANNEL switch
(R
F converter switch)
This switch selects the channel for TV signals to be trans-
mitted from the RF OUT terminal.
Set this switch to the vacant channel (3 or 4) which is not
used for broadcasting in your viewing area.
®
ANT IN terminal
Connect the in coming antenna or cable TV to this con-
nector.
®
U switched AC convenience outlet
This outlet is available as an AC power outlet for supplying
up to 400W. It is not switched.
8 Power Cord
Connect to AC 120 Volt 60 Hz.
-7-