Table of Contents
Advertisement
Appendix A
where:
[path1] - A complete DOS path string including logical drive
identifier
DA2000.SYS can be found.
[path2] - A complete DOS path string including logical drive
identifier
Microsoft
can be found.
[driver signature] - The signature for CD-ROM driver, the driver
signature specified in CONFIG.SYS must match the driver
signature specified in AUTOEXEC.BAT mscdex command.
[logical drive] - The next alphabet of the last logical drive been
assigned to hard disk drives.
Example:
If there is a subdirectory, C:\ASUS, containing the ASUS PCI-
DA2100/-DA2200 ASPI Manager file DA2000.SYS and CD-ROM
Driver file ASPICDRM.SYS, a subdirectory, C:\DOS, containing the
Microsoft CD-ROM extension program MSCDEX.EXE, and MS-DOS
logical drives C: and D: have been assigned to hard disks, then the
following lines should be added to the CONFIG.SYS and
AUTOEXEC.BAT files respectively:
In CONFIG.SYS file
DEVICE=C:\ASUS\DA2000.SYS
DEVICE = C:\ASUS\ASPICDRM.SYS /D:mscd001
LASRDRIVE = E
In AUTOEXEC.BAT file
C:\DOS\MSCDEX /D:mscd001
Note that there are no restrictions with regard to where these lines
are added in the CONFIG.SYS. Also note that the ASUS PCI-
DA2100/-DA2200 ASPI Manager will automatically select an optimal
configuration so no load line options are needed.
The ASUS PCI-DA2100/-DA2200 ASPI Manager and CD-ROM
Driver can be "loaded high" should it be desirable to conserve system
140
and subdirectories indicating where the file
and
subdirectories
CD-ROM
®
extension program MSCDEX.EXE
ASUS PCI-DA2100/PCI-DA2200 User's Manual
indicating
where
the
Advertisement
Chapters
Table of Contents
Troubleshooting
