Installing The Driver During Winnt 4.0 Installation - Asus PCI-DA2100 User Manual

Pci-to-scsi ultrawide raid controller card
Hide thumbs Also See for PCI-DA2100:
Table of Contents

Advertisement

Appendix A
3.4

Installing the Driver During WinNT 4.0 Installation

The following installations are covered in this section:
A. You want to first create a RAID logical drive and then install
Windows NT 4.0 on it; and B. You want to install Windows NT on
one of your SCSI hard disk drives. If you want to install
Windows NT 4.0 on a RAID logical drive, begin at step 1 below; if
you want install Windows NT 4.0 on a single SCSI hard disk drive,
begin at step 10 below. (For either configuration, we assume that you
have already installed the ASUS PCI-DA2100/-DA2200, attached the
cable(s) to a channel(s), attached SCSI hard disk drives to the
cable(s), attached the power supply cables to the drives, and then
turned on the power supply for both the drives and the system.
The following files are supplied for driver installation, they are put
in the \WINNT\V4_0X subdirectory for Windows NT 4.0
-
DA2000.SYS: ASUS PCI-DA2100/-DA2200 Miniport Driver for Win
NT 4.0
-
PCIDA: Tag file for driver installation.
-
OEMSETUP.INF: Information file for driver installation.
-
TXTSETUP.OEM: Information file for driver installation.
-
README.NT4: A text file describing the ASUS PCI-DA2100/-
DA2200 miniport driver.
1. (For steps 1 through 5, it is assumed that you want to first create
a RAID logical drive, and then want to install Windows NT 4.0
on that drive.) Insert the boot diskette and boot up your system.
Remove the boot diskette and insert the ASUS PCI-DA2100/-
DA2200 Text RAID Manager diskette.
2. At the prompt, type A:\RAIDMAN\DOS\RAIDMAN.EXE
and then press <Enter>.
3. The ASUS Text RAID Manager should display the PCI address
of the ASUS PCI-DA2100/-DA2200 RAID controller. You are
prompted to select the controller. Press <Enter> to select.
4. You will see the Main Menu of the ASUS Text RAID Manager.
Select View and Edit Logical Drives, and then press <Enter>.
Create a logical drive and map it to a SCSI ID and LUN (see
Chapter 6 for a detailed explanation.)
156
ASUS PCI-DA2100/PCI-DA2200 User's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pci-da2200

Table of Contents