Asus PCI-DA2100 User Manual page 190

System is not stable after
running for a period of time.
When using "Scan New SCSI
Drive" and the desired ID is
empty, an empty drive entry
appears.
The logical drive states
"INVALID".
In "View and Edit SCSI Drives"
or "View and Edit SCSI
Channels", the speed is only
"20.8Mhz", not "40Mhz"
All settings are too complex to
remember.
190
1. SCSI cable must be shorter than 2
meters.
2. Make sure terminators are
proper installed.
3. Power supply voltage must be
within specification.
4. Check the enclosure's inner
temperature.
1. Refer to section 8.4.1, Scan New
SCSI Drive, on how to remove
the empty drive entry.
1. "Optimization for I/O", when
creating the logical drive in
Cache Parameter, is different
from the current setting.
2. Change "Optimization for I/O"
to the opposite setting and reset
the controller.
1. "20.8Mhz" is SCSI sync
frequency, not transfer rate.
2. Refer to Appendix B, SCSI Cable
Specifications, for details.
1. After the system installation is
completed, write down all of the
settings and related information
in Appendix G, Record the
Settings, for future reference.
ASUS PCI-DA2100/PCI-DA2200 User's Manual
Appendix E