Installing Driver In Existing Winnt 3.1/3.51 System - Asus PCI-DA2100 User Manual

3. Prepare for the installation by using DISKCOPY (or any other
disk-copy utility) to make a backup copy of ASUS PCI-DA2100/-
DA2200 controller distribution diskette. If you are installing
Windows NT 3.1, copy all files from \WINNT\V3_1 to root
directory of the backup diskette. If you are installing Windows
NT 3.5x, copy all files from \WINNT\V3_5X to root directory of
the backup diskette. Use the backup copy as your working
diskette.
4. If you are installing Windows NT from a floppy drive, insert the
"Windows NT Disk #1" into floppy drive A. If you are installing
Windows NT from a CD-ROM drive, insert the "Windows NT
Setup Boot Disk" into floppy drive A.
5. Reset your computer.
6. When Prompted, select Custom Setup. If you are installing
Windows NT 3.1 go to step 8.
7. Press S to skip mass storage devices detection.
8. Windows NT setup cannot find any adapter and displays
NONE. Press S to specify additional SCSI controllers. From the
list of SCSI adapters, select "Other (Requires disk provided by a
hardware manufacturer)".
9. Insert the ASUS PCI-DA2100/-DA2200 distribution diskette into
floppy drive A and press [Enter]. The screen displays "DA-2000
Series PCI-TO-SCSI RAID Miniport". Then, press [Enter] to select
this driver.
10. Press [Enter] to continue Windows NT setup and follow the
steps given in Windows NT Installation documentation.
3.2

Installing Driver in Existing WinNT 3.1/3.51 System

If you are adding an ASUS PCI-DA2100/-DA2200 controller to a
computer that already has an ASUS PCI-DA2100/-DA2200 controller
installed for Windows NT, then follow step 1 through step 2 only.
If you are adding an ASUS PCI-DA2100/-DA2200 controller to a
computer that has no ASUS PCI-DA2100/-DA2200 controller
installed for Windows NT, then follow all steps.
ASUS PCI-DA2100/PCI-DA2200 User's Manual
Appendix A
153