Updating Windows Nt 3.1/3.51 Device Driver - Asus PCI-DA2100 User Manual

9. Make sure the new added device driver is in the installed SCSI
adapter list, then press "Close" to exit the "SCSI Adapter Setup".
and then close the "Windows NT Setup" program. If you are not
running Windows NT 3.1, go to step 11, or do step 10.
10. Select "Control Panel" program from "Main" program group.
Select "Devices" program. A device list appears, select the ASUS
PCI-DA2100/-DA2200 device, then click on the "Startup" button.
Change Startup type to "System", then select "OK". Select "Close"
to exit "Devices" program, then close the "Control Panel"
program.
11. Shutdown Windows NT, then restart your computer. It is
possible that some drive letter assignments may be different
from previous configuration.
3.3

Updating Windows NT 3.1/3.51 Device Driver

1. Copy the new device driver from the distribution diskette to the
directory [SystemRoot]\system32\drivers, where [SystemRoot]
is the system root directory of Windows NT.
For example, if the system root directory is C:\WINNT, then
type the following:
copy a:\winnt\v3_1\da2000.sys c:\winnt\system32\drivers
Skip step 2 if the version of your Windows NT is not v3.1.
2. If one of the ASUS PCI-DA2100/-DA2200 controllers control the
system boot disk, use ATTRIB.EXE to disable the hidden, system
and read only attributes of c:\ntbootdd.sys, then copy the same
driver to c:\ntbootdd.sys and restore the attributes of
c:\ntbootdd.sys.
For example,
attrib -h -r -s c:\ntbootdd.sys
copy a:\winnt\v3_1\da2000.sys c:\ntbootdd.sys
attrib +h +r +s c:\ntbootdd.sys
3. Shutdown Windows NT, then restart your computer.
ASUS PCI-DA2100/PCI-DA2200 User's Manual
Appendix A
155