Asus PCI-DA2100 User Manual page 157

5. Press <Esc> and exit the ASUS Text RAID Manager. Remove the
ASUS PCI-DA2100/-DA2200 driver diskette.
6. Insert the Windows NT 4.0 Installation Diskette #1. Reset the
computer to begin installation of Windows NT.
7. You will be prompted to insert diskette #2 and diskette #3 (for
detailed information about Windows NT 4.0 installation, see
your Windows NT 4.0 User's Manual.) Installation diskette #3
will recognize an IDE CD-ROM (if you have one) and then ask if
you want to specify SCSI adapters, other CD-ROM drives, or
disk controllers. You want to specify the ASUS PCI-DA2100/-
DA2200. Press "S".
8. Depending on your system, may be more than one device listed.
Select Other (Requires disk provided by a hardware
manufacturer), and then press <Enter>.
9. You will be prompted to insert the disk from the hardware
manufacturer. Insert the ASUS PCI-DA2100/-DA2200 driver
diskette, and then press <Enter>.
10. Select DA-2000 Series RAID Miniport for NT v4.0 from the list,
and then press <Enter>. The Windows NT Setup screen will now
indicate that it recognizes the RAID Miniport in addition to the
IDE CD-ROM. Setup gives you the choice of specifying
additional devices for use with Windows NT (press "S") or of not
specifying additional devices (Press <Enter>). Press <Enter> to
continue.
11. Remove the ASUS PCI-DA2100/-DA2200 driver diskette and re-
insert Windows NT 4.0 Installation Diskette #3, as prompted.
Confirm your system configuration and accept the Windows NT
license agreement, as prompted. Setup will display the logical
drive that you created on the SCSI adapter. Setup asks if you
want to install Windows NT on that drive. Press <Enter> to
begin installation on that logical drive. (At this point,
Windows NT also gives the choice of partitioning the logical
drive. To keep the example simple, we do not do this.) The rest
of the installation is described in the Windows NT 4.0 User's
Manual.
ASUS PCI-DA2100/PCI-DA2200 User's Manual
Appendix A
157