partition> q
format> q
# Perform rank capacity expansion. #
Operation after rank capacity expansion.
Halt the job and conduct unmount ("label" cannot be done in the mount state).
# format
See (1) (This area appears to be the same as area (1)).
Specify disk (enter its number): 1
See (2) (This area appears to be the same as area (2)).
Select type from the menu.
←
format> type
AVAILABLE DRIVE TYPES:
0. Auto configure
1. Quantum ProDrive 80S
2. Quantum ProDrive 105S
3. CDC Wren IV 94171-344
4. SUN0104
5. SUN0207
6. SUN0327
7. SUN0340
8. SUN0424
9. SUN0535
10. SUN0669
11. SUN1.0G
12. SUN1.05
13. SUN1.3G
14. SUN2.1G
15. SUN2.9G
16. Zip 100
17. Zip 250
18. SUN9.0G
19. NEC-NEC Storage2000-W269
20. NEC-NEC Storage2000-W269
21. other
Specify disk type (enter its number)[19]: 0
c3t4d0: configured with capacity of 1.50GB
<NEC-NEC Storage2000-W269 cyl 1532 alt 2 hd 16 sec 128>
Select target disk.
←
←
Select Auto configure.
124
Recognition of logically
expanded capacity