Table of Contents
Advertisement
(3) Connection between array controllers and disk enclosures
Use the FC cable (HSSDC) provided with the additional disk enclosure or the FC
cable (HSSDC) of the separately priced DE cable (NF9120-SJ04E).
Push the
connector at either end of the FC cable into the FC connector (DEF2) for the disk
enclosure, which is on the additional control card in the controller 0 (CONT0) of the
disk array unit until a click is heard. The FC cable has the same connectors at both
ends. Either connector may be connected to the additional control card in the
controller.
Push the connector at the other end of the FC cable into the FC-IN connector on
adapter 0 (ADP0) of the additional disk enclosure until a click is heard.
Similarly, connect the FC connector (DEF3) for the disk enclosure, which is on the
additional control card in the other controller (CONT1) of the disk array unit, to the
FC-IN connector on adapter 1 (ADP1) of the additional disk enclosure.
Do not connect any cable/connector to the DEF3 connector of additional control card
on controller 0 (CONT0) or DEF2 connector of the additional control card on
controller 1 (CONT1).
Subsequently, use the DE diagnosis cable provided with the additional disk
enclosure or the DE diagnosis cable of the separately priced DE cable
(NF9120-SJ04E). Push the connector at either end of the DE diagnosis cable into
the DE-DIAG connector [PORT1] on adapter 0 (ADP0) of the existing disk
enclosure until a click is heard. The DE diagnosis cable has the same connectors at
both ends. Either connector may be connected to the adapter of the existing disk
enclosure.
Push the connector at the other end of the DE diagnosis cable into the DE-DIAG
connector [PORT0] on adapter 0 (ADP0) of the additional disk enclosure until a
click is heard.
Similarly, connect the DE-DIAG connector [PORT1] on adapter 1 (ADP1) of the
existing disk enclosure to the DE-DIAG connector [PORT0] on adapter 1 (ADP1) of
the additional disk enclosure.
63
Advertisement
Table of Contents
