Disk Enclosure (Front) - NEC NF2300-SR412E User Manual

3.7

Disk Enclosure (Front)

A front mask is installed on the front face of the disk enclosure as shown in the figure
above.
The front mask can be removed by releasing the lock with the accessory key and pulling
out toward you with your hands hooked on the both sides of the mask.
Removing the front mask, you can view the disk drive shown in the figure below.
(5) HDD FAULT
(1) POWER LED (green)
The POWER LED lights green if the AC power is supplied and the power switch is
set to ON. The LED is off if the power switch is set to OFF.
(2) SERVICE LED (orange)
The SERVICE LED lights orange if an error occurs in the disk enclosure.
The LED is off while the disk enclosure operates normally.
(6) Ejector
LED
(4) HDD READY LED
(1) POWER LED
(1) POWER LED
(3) Disk drives/dummy trays
25
(2) SERVICE LED
(2) SERVICE LED