Table of Contents
Advertisement
1.2
Environment in Use of Disk Array Unit
In installation of the disk array unit, take into account the following items on the location,
room temperature, space required for handling, ventilation, and other conditions.
Install the disk array unit indoors.
Do not expose the disk array unit to direct sunlight. Use a window shade or
curtain to block sunlight to the unit if necessary.
Install the disk array unit on a level floor with sufficient strength. In addition, do
not give shocks and/or vibrations to the disk array unit. If so, some components
may be dropped to cause the disk array unit to be defected and/or people to be
injured.
Install the disk array unit in an area under the following conditions; temperature
range between 5°C - 40°C and humidity range between 10% - 80% (without
condensation).
Do not install the disk array unit in an area with water or oil poured, area
suffering liquid such as water and oil, suffering steam, area with steam, and
area with much moisture. If so, a fault or electrical shock may occur.
Do not install the disk array unit in an area with emission of chemical steam or
an area where the disk array unit may be contact with inflammable substance.
If so, a fault, fire, or explosion may occur.
Do not install the disk array unit in an area with much dust. If so, a fault may
occur.
Do not install the disk array unit in an area with direct sunshine or near fire or
an apparatus generating heat such as stove. If so, a fault or deformation may
occur.
Do not install the disk array unit near TV, radio, and codeless telephone. Some
noise may appear in the TV, radio, and codeless telephone.
Do not use cellular phones near the disk array unit. If so, a fault may occur.
Do not install the disk array unit near a device generating strong magnetism. If
so, a fault may occur.
Install the disk array unit so that the ventilating holes opened on the front and
rear faces are not blocked. If not, heat generation and/or fault may occur.
2
Advertisement
Table of Contents
