Turning On Cross Call Feature - NEC NF2300-SR412E User Manual

1.3

Turning on Cross Call Feature

To enable both controllers to access to all logical disks, it is necessary to turn on the cross
call feature.
However, data destruction may occur if the transmission path feature is not provided by
middleware such as NEC Storage PathManager. If so, it is recommended to use the logical
disks with the cross call feature set to OFF.
See "Several Settings on Disk Array (Set of Cross Call)" in the "Guide to Setting
Configuration of NEC Storage Manager".
Example: Turning on cross call
• Select "21. Cross Call" from the management software (NEC Storage Manager)
menu to turn on the cross call setting.
137