Table of Contents
Advertisement
5.4
Connection of Ethernet Cable
To enable the configuration change and fault monitoring for the disk array unit by the
NEC Storage Manager through Ethernet, the Ethernet cable must be connected.
(1) Installation of Ethernet cable
Connect the separately priced Ethernet cable to the LAN modular jack on the LAN
card.
Connect the host system on which the management software NEC Storage Manager
is installed to Ethernet.
Only connecting the cable to the LAN card cannot make it possible to use
the NEC Storage Manager through Ethernet. Contact your service
engineer of the maintenance service agent with expert knowledge.
52
Advertisement
Table of Contents
