Table of Contents
Advertisement
(7) Connection of power plug
Insert the plug of the power cord, provided with the additional disk enclosure or
NEC-specified power cord, into an AC outlet. You can use the NEC-specified
power cord alternatively. Since the plug has an earth pin, it must be connected to
an AC outlet with an earth terminal as shown below.
While the disk array unit can accept the power of 100 - 240 VAC (50/60
Hz), the power cord coming with the disk array unit can only accept 100
– 120 VAC. Use 100 – 120 VAC (50/60 Hz) when the attached power
cord is used. Using power of different voltage may cause electric shock,
smoke, and/or fire to occur.
The disk array unit cannot use the disk enclosure only if the disk
enclosure is installed additionally. Provide the proper setting for the disk
enclosure by using the "NEC Storage Manager" feature of the disk array
unit or contact the service engineer of the maintenance service agent
with the expert knowledge.
66
Advertisement
Table of Contents
