Using The Network Printer Manager - NEC SuperScript 1800 Network User's Manual

Using the Network Printer Manager

The SuperScript 1800 Network Printer Manager (NPM) is an
administrative tool that can also be used for configuring the
NIC.
The NPM must be installed on a computer running
Windows 95, 98, or NT 4.0 and which is connected to the
network. For more information about NPM, see Appendix B,
on page 47.
To configure the NIC using the Network Printer Manager:
1. Click the Windows Start button, point to Programs, then
NEC SuperScript 1800, and click NEC SuperScript 1800
Network Printer Manager to start the NEC SuperScript
1800 Network Printer Manager.
Once NPM starts, it will begin searching the network for
the printer. Every SuperScript 1800 printer found will be
listed in the NPM main window.
2. Select the printer that must have it's NIC setup.
The printer can be identified from the Printer Name
column by its NIC serial number, NECnnnnnnnnnnnn,
where nnnnnnnnnnn is the MAC address of the card.
The MAC Address for the NIC can be determined by
printing a Network Configuration page. For instructions
about printing that page, see "Printing a Network
Configuration Page" on page 16.
3. From the Settings menu, select Network Interface to
open the Network Interface properties window.
4. Click the General tab to bring it to the front.
5. In the Printer Name text box, type in a name for the
printer.
6. In the Printer Description text box, type in a description
for the printer; for example, its location.
7. Click the TCP/IP tab to bring it to the front.
8. Assure the TCP/IP check box is selected.
9. From the IP Address Assignment Method drop-down
list, select the method used by the Network Operating
System (NOS) for assigning IP addresses to computers
and printers connected to the network.
Item Description
Static Select this item if you want to manually enter a
permanent IP address for the printer.
BOOTP Select this item if you want the NIC to broadcast
a request to a BOOTP server for an IP address.
The printer must be restarted after the NIC is
configured.
RARP Select this item if you want a the NIC to
broadcast a request to a RARP server for an IP
address. The printer must be restarted after the
NIC is configured.
DHCP Select this item if you want a DHCP server to
assign an IP address to the printer that may
automatically be changed by the server. One
cause for address change is if the printer is
restarted.
10. If the STATIC method was selected, in the IP Address
text boxes, type in the IP address for the printer.
• In the Subnet Mask text boxes, type in the subnet
mask.
• In the Default Gateway text boxes, type in the
gateway (router) IP address.
11. If print jobs will be received from NetWare clients, click
the NetWare tab to bring it to the front.
• Select the Enable NetWare check box.
• From the IPX Frame type options, select how the
printer must determine the type of Ethernet frames it
is receiving. If you do not know, select Auto.
Configuring the NIC 15