Tcp\Ip Configuration; Netware Configuration - NEC SuperScript 1800 Network User's Manual

TCP\IP Configuration
Use the TCP\IP Configuration page for adjusting the network
addressing for the NIC. From the Admin menu, click
TCP\IP to view this page.
Item Description
TCP/IP Enabled Use this check box to turn on the TCP/IP
protocol stack.
IP Address Use this drop-down list for selecting how
Assignment an address will be assigned to the printer.
Method Select Static if you want to manually enter
a permanent address. Select DHCP if you
want a DHCP server to assign an address;
however, if the printer is restarted, it may
be assigned a different address. Select
BOOTP or RARP if you want the NIC to
broadcast a request for an address from a
BOOTP or RARP server. The printer must
be restarted if BOOTP or RARP is
selected.
NetWare Configuration
Use the NetWare Configuration page for turning on and
adjusting the NetWare protocol stack. From the Admin
menu, click NetWare to view this page
Item Description
NetWare Enabled Use this check box to turn on the IPX
protocol stack.
IPX Frame Type Use these options to select the type of
Ethernet framing used by your IPX
network.
.
Admin Pages 59