Job Menu - NEC SuperScript 1800 Network User's Manual

Config Menu
Item Description
Personality Switches the printer between the PCL and
PostScript printer languages. Use Auto if
both types will be used.
Tray Lock Use to select which tray the printer should
not use when the original tray runs empty.
Power Save Use to select how much idle time must
pass before power save mode is entered.
Econo Mode Reduces the amount of toner used for
graphics in a print job.
Jam Recovery If set to Off, a jammed sheet will not be
reprinted.
Auto Continue If set to On, and the wrong paper size is
loaded, the printer will begin printing after
waiting 60 seconds.
Tray Switch If set to On, and a tray runs out of paper,
the printer will switch to a tray that
contains the same paper.
Low Toner If selected, printing will stop when toner is
low. Press GO to by-pass this control.
52 SuperScript 1800 — Network User's Guide

Job Menu

Item Description
Paper Type Use to switch between paper weights.
Toner Density Controls how much toner is used in a print
job.
SET Turns on NEC's Sharp Edge Technology
printing mode for text or photos.
Menu Clear Use to set all controls to their default
values.
Memory If set to Yes, complex print jobs can be
Optimization printed more efficiently.
I/O Timeout Controls the time in seconds that should
pass before printing the last page of a print
job that does not end with a command to
print the page.
Duplex Top Margin Controls the second page top margin.
Duplex Left Margin Controls the second page left margin.
Short Edge Binding Controls the margin added to the binding
edge of landscape print jobs.
Long Edge Binding Controls the margin added to the binding
edge of portrait print jobs.