NEC SuperScript 1800 Network User's Manual page 80

15. Press Item until
SV-IP B2
16. Press Value until the second octet appears.
17. Press Select.
18. Press Item until
SV-IP B3
19. Press Value until the third octet appears.
20. Press Select.
21. Press Item until
SV-IP B4
22. Press Value until the fourth octet appears.
23. Press Select.
24. Press GO until
READY
After configuring the printer, the firmware can then be
upgraded.
74 SuperScript 1800 — Network User's Guide
appears.
appears.
appears.
appears.
To upgrade the NIC firmware:
Note:
Some of the following steps may appear to be
slow because of network traffic.
1. Move to the Windows 95 computer.
2. Click the Windows Start button, point to Programs, then
NEC SuperScript 1800, and click NEC SuperScript 1800
Network Printer Manager to start the NEC SuperScript
1800 Network Printer Manager.
Once the manager starts, it will begin searching the
network for the printer. Every SuperScript 1800 printer
that is found will be listed in the Network Printer
Manager.
3. Select the printer that must have it's NIC firmware
upgraded.
4. From the Maintenance menu, select Upgrade Firmware
to open the Choose the Upgrade Firmware File dialog
box.
5. From the list, select the printer that must have it's NIC
firmware upgraded.
6. Click Browse to open the Open dialog box.
7. Navigate to the location of the upgrade file then select it.
It will have an AIF filename extension.
8. Click Open to return to the Choose the Upgrade
Firmware File dialog box.
9. Click Start to begin upgrading the firmware.
10. When the upgrade is completed, click OK.