Printer Status Window; Protocol Statistics Window; Tcp/Ip Tab; Upgrading The Firmware - NEC SuperScript 1800 Network User's Manual

P S
RINTER TATUS
The Printer Status window can be started from the
Maintenance menu by selecting Printer Status. Use it for
viewing the operational state of a specific printer. Shown
below is the Printer Status window.
W
INDOW
P S
ROTOCOL TATISTICS
The Protocol Statistics window is started from the Settings
menu. Use it for viewing packet, framing, and error activity
at a specific printer's NIC. Five tabs are used for presenting
information about the following types of network traffic.
• TCP/IP Traffic
• IPX Traffic
• AppleTalk Traffic
• SNMP Traffic
• DLC Traffic
Shown below is the Protocol Statistics window with the
TCP/IP tab at the front.

TCP/IP Tab

U
PGRADING THE
Upgrading the Controller Board firmware is described by
Appendix E, on page 47.
W
INDOW
F
IRMWARE

Printer Status Window

55