Configuring A Windows 3.1X Client - NEC SuperScript 1800 Network User's Manual

Now you can configure the individual Windows, Macintosh,
and UNIX print clients that are connected to the network. See
the following sections for instructions.
• "Configuring a Windows 3.1x Client" on page 38.
• "Configuring a Windows 95 or 98 Client" on page 39.
• "Configuring a Windows NT 4.0 Client" on page 40.
• "Configuring a Macintosh Client" on page 41.
• "Configuring a UNIX Client" on page 42.
Configuring a Windows 3.1x Client
Computers running Windows 3.1x can be configured as a
Windows NT Server client after Windows NT Server has
been configured with the NEC SuperScript 1800 Network
Printer Manager or directly from NT Server itself.
To configure a Windows 3.1x client, you must install a printer
driver then create a printer port.
To install a printer driver:
1. Insert the SuperScript 1800 Solutions CD into the client
computer.
2. Open the Program Manager window.
3. From the File menu, select Run to open the Run dialog
box.
4. Click Browse to open the Browse dialog box.
5. From the Drives drop-down list, select your CD drive.
The directories and files located on the SuperScript 1800
Solutions CD will appear.
6. Select Setup.exe, then click OK to return to the Run
dialog box.
7. Click OK to begin installing the printer software.
When the Select Components dialog box appears, select
the Printer Driver check box then continue to follow the
instructions displayed on your monitor to finish the
install.
38 SuperScript 1800 — Network User's Guide
To create a printer port:
1. From the Program Manager window, double-click Main to
open the Main window.
2. From the Main window, double-click Control Panel to
open the Control Panel window.
3. From the Control Panel window, double-click Printers to
open the Printers window.
4. From the Installed Printers list, select the printer.
5. Click Connect to open the Connect dialog box.
6. From the Ports list, select LPT1, LPT2, or LPT3.
7. Click Network to open Connect Network Printer dialog
box.