Connection Of Standard Telephone To Extensions - Panasonic EASA-PHONE KX-T30810 Installation Manual

Holder A
(see step 2)-
Holder B
(see step 2)-
Insert rhe modular plug of the tele-
phone line cord (2-conductor wir-
ing) into the modular jack (marked
EXT.) on the KX-T30810.
Place rhe cords into Holders A and
Outer 2 pins (Low and High) will not
be used for Standard Telephone.
R: Ring
T:
Tip
View
of
TEL Jack (extension)
--Use 2-conductor wiring
for each extension.
To Extensions
The max. length of' rhe telephone line cord that cotltlects the*KX-T30810 atld rhe extension is shown below.
26 AWG: Utlder 2290 feet
24 AWG: Under 3700 feet
22 A WG: Under 5900 feet
[f rhe relephotle or atuwerhg machine with A-Al relay is cotlnected to rhe KX-T30810, set the A-Al relay switch of
rhe telephotle or atuwering tnuchine to OFF.
nection may cause the KAY-T30810 to operate improperly.
See 'During Installation" page 5-1 and "During Connection" page 5-2 before connecting.
1-N