Programming Instructions - Panasonic EASA-PHONE KX-T30810 Installation Manual

To activate this system, the requirements from telephone company and the customer must be programmed once the
Power Switch has been turned on.
. At extension 11:
All system programming changes (example: sys-
tem clear, station program clear, toll restriction,
hookswitch flash timing...) are done through
extensiorl 11,
. System Program Switch setting:
The System Program Switch located on the
KX-T30810 must be set to the PROGRAM
position while making program changes. After all
programming changes are completed, return the
program switch to the SET position.
3. Overlay:
This overlay is used for programming the system
and the program function names on buttons are
inscribed on this card. Refer to page 2-2.
. Before system programming, you may operate
systetn clear and station program clear to set
dqfault data of programming.
A. System Clear:
"SYSTEM CLEAR" will be displayed.
ess the NEXT button.
"ALL CLEAR?" will be displayed.
3 Press the MEMORY button to clear system.
4 To exit from system clear, press the END
button.
The following features are preset as the default
data.
Date and Time
System Speed Calling
CO Connection Assignment
Dial Mode (TonelPulse) Selection
Switching Mode (DaylNight Service)
Starting Time (DaylNight Sert1ic.e)
Flexible Day Outward Dialing Assignment
Flexible Night Outward Dialing Assignment
Flexible Day Ringing Assignment
Flexible Night Ringing Assignment
Toll Restrictiorz-C1as.r Assignment
Toll Restriction-Area Code Selection
Progrummable Operator Cull
Host PBX Access Codes Assignment
Automutic Answering (AutomaticlManuul)
Preferred Line Assignment
Programmable Call Waiting
Duration Time Count Start Mode
Hookswitch Flash Timing
Disconnect Time
Calling Party Control (CPC) Signal
Intercom Alerting Mode
Programmable Doorphone
Dial Call Pickup Group Assignment
Busy Tone Selection
Hold Time Reminder
Hold Recall Time Set
Programmable External Paging Access Tone
DTMF Receiver
Programmable Toll PreJix
Programmable Secret Auto Dial
B. Station Program Clear:
1 Dial (98).
"EXT CLEAR" will be displayed.
2 Press the NEXT button.
"ALL CLEAR?" will be displayed.
3 Press the MEMORY button to clear the
system.
4 To exit from station clear, press the END
button.
The following features are preset as the
defuult data.
One Touch Dialing
Background Music
Cull Forwarding
Data Line Security
Dial Call Pickup Deny
Do not Disturb
Selection
2-1