Call On Hold - Intercom - Panasonic EASA-PHONE KX-T30810 Installation Manual

To place a call on hold:
To retrieve:
at the holding extension
PRESS
"HOLD"
PRESS
"KM"
another extension
I
DIAL THEHOLDING
EXTENSION
NUMBER
OlAL"5"
Extension user can place an intercotn call on
hold.
Calls on hold can be released by another
extensions.
1. You are in conversation with an internal
party.
f
2. Press the HOLD button.
The indicator on the ICM button will flash
slowly
The confirmation lone of 2 beeps will be
heard.
To retrieve at the holding extension,
press the lCM button whose indicator
flashing slowly.
The indicator on the ICM butron will be on.
To retrieve from another extension,
dial (5) and then the extension number of rhe
phone on which the call was placed on hold.
[51 WBI
t
L - - - - -AB=ll through 18
Refer to "Call Purk Retrieve" on page 3-11.
When a call is on hold for more than
30 minutes after a hold time reminder is
sounded, the call will be terminated aurotnati-
tally.
A hold time reminder is sounded through rhe
built-in speaker of the extension.
Calls on hold will be recalled either aftet
30
seconds, 1 minute,
1 minute and
30 seconds or 2 minutes, once handset is
laced
(or the SP-PHONE button is
ssed)
If hold recall time set is set to "DISABLE",
will not be recalled.
Refer lo "Hold Recall Time Ser" on page2-34.
The hold time reminder is activated, even if the
hold recall titne set is programmed to "DIS-
ABLE".
When lifting the handset (or be pressing the
SP-PHONE button):
before recalling...the dial tone will be heard
with the cull on hold.
You may dial another
phone number.
while recalling.. .the call on hold will be
released and entered into the
conversarion mode.
An Inrercom hold can be activated on one
exretision only.
3-U