Flexible Night Outward Dialing Assignment - Panasonic EASA-PHONE KX-T30810 Installation Manual

[07] [NEXT] [Ai31 [c...El [MEMORY] [END]
;] [NEXT] [NEXT] [C...E] [MEMORY][END]
I
I...- until the desired extension number appears
Through programming, you can
select
which
extensions may be used for outward dialing by
using the night mode of opration.
"NIGHT: OUT CO" will be displayed.
2. Press the NEXT button. '
"ENTER EXT NO." will be displayed.
prompt entering extension number.
3. Press the NEXT button.
"11: CO 1, 2, 3" will be displayed and "1, 2,
3" will blink.
. Dial the CO numbers to be entered.
The desired combination
of
CO Lines will be
displayed.
To prohibit dialing, press the CLEAR button
instead of CO number.
"II: CO....." will be displayed.
When you
start
the programming from step 1,
you may dial the desired extension number
instead of the NEXT button at step 3.
The PREV button allows you to go to the
previous extension for displaying the CO
assignment.
Example: C~~P~~Y XYZ
Company XYZ wants extensions 11, 13 and 16
t ave access to CO
calls the
1, 2 and 3 on outgoing
during night. Extensions 17 12, 14, 15,
and 18 are to be programmed for access to only
CO I and 2.
1. [07]
[NEXT] [(NEXT)
or
(ll)] [l] [2] [3]
[MEMORY]
2. [NEXT] [l] [2] [MEMORY]
3. [NEXT] [l] [2] [3] [MEMORY]
4. [NEXT] [l] [2] [MEMORY]
5. [NEXT] [l] [2] [MEMORY]
6. [NEXT] [I] [2] [3] [MEMORY]
7. [NEXT] [l] [2] [MEMORY]
8. [NEXT] [l] [2] [MEMORY] [END]
.
Press the MEMORY button.
The blinking LCD will stop.
. Repeat steps 3 to 5, to program the assign-
ment on the other extensions.
7. To return to the initial program mode, press
the END button.
See page 5-14.
2-14