Flexible Day Ringing Assignment - Panasonic EASA-PHONE KX-T30810 Installation Manual

[08] [NEXP] [Ai3] [C...E] [MEMORY][END]
[od8] [NEXT] [NEXT] [C...E] [MEMORY][END]
~-------until the desired extension number appears
s
Through programming, you can select which
extensions will ring on incoming calls from the
Central Office during the day time.
.
Dial (08).
"DAY: IN CO" will be displayed.
. Press the NEXT button.
"ENTER EXT NO" will be displayed.
3. Press the NEXT button.
"11: CO 1, 2, 3" will be displayed and "1, 2,
3" will blink.
. Dial the CO numbers to be entered.
The desired combination of CO Line will be
displayed.
To prohibit ringing, press the CLEAR but-
instead
of
CO number.
"11: CO....." will be displayed.
. Press the MEMORY button.
The blinking LCD will stop.
.
Repeat steps 3 to 5, to program the assign-
ment on the other extensions.
7. To return to the initial program mode, press
the END button.
2-15
When you start the programming from step 1,
you may dial the desired extension number
instead
of
the NEXT button at step 3.
The PREV button allows you to go to the
previous extension
for
displaying the CO
assignment.
Example:
Incoming calls from Central Ofice during the
day are programmed to ring at extension 11
only.
1.
[08] [NEXT] [++I [CLEAR] [MEMORY]
2.
[NEXT] [l] [2] [3] [
See page 5-15.